Start server

Example: start server listening https://127.0.0.1:443

{"message": "start", "params":{"host": "127.0.0.1", "port":443}}

Example: start server listening https://93.84.14.55:8443

{"message": "start", "params":{"host": "93.84.14.55", "port":8443}}

How open a new audio/video session

Example: start new web-browser session

1. Go to https://93.84.14.55:8443

2. Press join button

3. You will join a new room

4. If other peer wants to join your joon, just send your url (something like: https://93.84.14.55:8443/r/829907674).

Stop server

{"message": "stop"}

TCP Server

All console applications can run an internal TCP Server that allows to send and receive commands as if were written directly on the console application.

Just start the application with the command -server and a new server will be started listening on port 8080. Example: if you want enable the server on WebSocket client, start the console application as follows:

sgcWebSocketClient.exe -server

Find below the full TCP Server parameters:

-server: starts the internal server on port 8080

-server.port: sets the listening port

-server.ip: sets the binding ip (useful if there are multiple ips).

If the server is enabled, a client connected to this server can send any JSON message and will receive any response as if was written directly from console application.

Example: if you want enable server on IP 192.168.1.1 and Port 5412

sgcWebSocketClient.exe -server -server.ip 192.168.1.1 -server.port 5412