eSeGeCe
software
Is supported your biometrics sdk fingerprint sensor BIO-key EcoID or Zvetcobiometrics P5100?
Or can you send me what fingerprint sensor is supported?
Thanks
Or can you send me what fingerprint sensor is supported?
Thanks
sgcBiometrics is based in Windows Biometric Framework, so in order to use these components, fingerprint readers must be compatible with this framework, for example, all Windows 10 Hello fingerprint readers are compatible with this framework.
I didn't test these fingerprints but if supports Windows Hello most probably will work. You can download a compiled demo where you can test all features from:
http://www.esegece.com/download/sgcBiometrics.zip
Some fingerprints only support some features, so it's better to test first.
This is the fingerprint I use for testing:
https://www.amazon.com/Benss-Fingerprint-Analyzer-Biometrics-Certification/dp/B073Z7FGKV/ref=sr_1_1?keywords=Benss+fingerprint&qid=1572897340&sr=8-1
I didn't test these fingerprints but if supports Windows Hello most probably will work. You can download a compiled demo where you can test all features from:
http://www.esegece.com/download/sgcBiometrics.zip
Some fingerprints only support some features, so it's better to test first.
This is the fingerprint I use for testing:
https://www.amazon.com/Benss-Fingerprint-Analyzer-Biometrics-Certification/dp/B073Z7FGKV/ref=sr_1_1?keywords=Benss+fingerprint&qid=1572897340&sr=8-1
- Page :
- 1
There are no replies made for this post yet.